1984 Chris Craft 312 stinger

For sale is a 1984 Chris Craft 312 Stinger with an Aluminum I beam three axle trailer. This is a rare boat with a solid hull and TWIN 502 CI crate motors. Both engines were Dyno'd at approx 435 HP and 520 ft-lb torque giving this beautiful sleek boat a total of 870HP and 1040 Ft-Lb of torque. The engines are supported by mercruiser TRS transmission and outdrives. Both engines got new alternators last year and the port engine got a new recirculating pump this year. Both engines have Holley 850cfm double pumpers supported by twin holley H/O electric fuel pumps. 4" through hull exhaust turns heads every time this boat fires up or goes down the river! Each engine has an external raw water cooled oil cooler and additional raw water cooled transmission fluid cooler. All oil lines have been replaced with 3000psi hydrolic fluid lines and forged steel fittings so that they will out last the boat itself. both engines have only ever been run with Valvoline VR-1 20W-50 racing oil and zinc additive for flat tappets. The port engine spring plate has a slight chatter to it which TRS guru's tell me is common and not concerning. The swim platform is made of redwood (the trees they cut roads through the middle of out west) with all stainless steel hardware. Inside the wrap around limousine couch is in perfect condition as is the forward bed. The sink was removed and a dry bar with 12V vanity light was built with a custom liquor shelf. This boat needs very minor cosmetic touch ups and has been in the water several times this summer. The props were stolen at the beginning of august and I didn't buy new ones knowing I had to sell the boat. The trailer has a brand new actuator coupling and SIX brand new tires all installed this summer. The brake lines have not yet been connected but I have never had a problem towing with my 2500. All lights and wiring on the trailer are good.